YSS-48F Electronic Single-shot Pontoon Inclinometer

YSS-48F is a self-floating single-shot electronic inclinometer that can perform inclination, azimuth, and other parameter measurement.

The instruments are used to measure the well track in petroleum drilling technology, which has capability of recording the inclination, azimuth of well and the face angle of high-side tool used for elbow on the film by means of optical imaging.

Two floating pontoons are optional based on the specific gravity of the mud and downhole pressure.

When in operation, it is pumped down to the non-magnetic collar to measure the parameters.

When the pump stops and the measurement is complted, the inclnometer buoyancy, free from any steel cable.

Its advantages are easy to use and time saving, and these advantages are signicicantly obvious, when applied in the wells of small inclination.

When equipped with the proper switch connectors, the inclinometer can perform single-shot hanged measurement, which serves as a standard single-shot hanged measurement, which serves as a standard single-shot inclinometer and offers very flexible and convenient choices to drilling measurement.

Specifications:

Inclination range: 0~180°

Inclination accuracy: ±0.2°

Azimuth range: 0~360°

Azimuth accuracy: ±1.5° (for inclination >2.5°)

Tool Face range: 0~360°

Tool Face accuracy: ±1.5° (for single-shot hanged measurement)

Probe length: ≤820mm

Probe weight: ≤2.6Kg

Max pressure: 60MPa (carbon fiber pontoon) 90MPa (aluminum alloy pontoon)

Pressure barrel outer diameter: Φ48mm

Max operating temperature: 125℃

Total length: ≤5m

Overall specific gravity: ≤ 0.85 (carbon fiber pontoon) ≤1.25 (aluminum alloy pontoon)

Floating speed: 150m/min

Max working well inclination: 40°

Applicable specific gravity of mud: 0.9~1.8 (carbon fiber pontoon) 1.5 (aluminum alloy pontoon)